Ascher Racing F64 SC V3 Wireless Sim Wheel

£865.00 ex. TAX - £1,038.00 inc. TAX

AVAILABLE FOR IMMEDIATE DESPATCH

The Ascher Racing F64 SC isn’t just another wheel; it’s a testament to the passion and expertise of racers, crafted by those who live and breathe the thrill of the track. Setting a new standard in direct-drive sim racing, redefining what quality truly means.

Boasting exceptional ergonomics and a vast array of customization options, this Ascher Racing F64 SC wheel stands out with unparalleled craftsmanship, ensuring utmost control. With a closed-rim design and tactile rubberized grips providing a confident and refined driving experience.

Meanwhile, the CNC-machined, anodized aluminium chassis and components guarantee absolute rigidity, eliminating any hint of twist or flex during operation.

The Ascher Racing F64 SC interface offers unbeatable functional adjustments. With 64 programmable inputs spread across buttons, dials, and switches, you can tailor every aspect of your favourite racing simulation.

The wheel’s face features brushed aluminium for a flawless finish, with each component manufactured to the highest quality standards. Responsive buttons offer clear feedback with distinct click points, including guarded buttons to prevent accidental activation of features like the pit limiter. Additionally, there are four standard dual-function rotary encoders and two rotary multifunction switches, along with optimally positioned seven-way joysticks for thumb control.

The bead-blasted shifter paddles deliver a strong snap action, with replacement magnets and spacers included to adjust the actuation force from 260g up to 800g as desired. The spring-loaded, dual-clutch paddles allow for customized two-step bite-point calibration and can also be programmed as throttle and brake hand controls.

Featuring a standard 6-bolt, 70mm thread pattern on the rear, the Ascher Racing F64 SC is compatible with Simucube/MiGE direct drive base units and major quick-release systems. An optional adapter is available to connect it to a Simucube 2 SQR plate. As an officially licensed Simucube Wireless Wheel™, the setup is straightforward, delivering consistent millisecond-range response times for zero-latency control during intense racing moments. An additional receiver module is required for older SC1 models.

Included are two sets of high-quality decals for labelling your inputs: 25 button options in both black and white finishes, along with 12 rotary encoder stickers in six different colours, including blanks for creating your custom labels.

Ascher Racing F64 SC V3 Wireless Sim Wheel Specs

Additional features of the SC version

  • Average battery runtime: 800h (rechargeable)
  • rechargeable via USB-C (approx. 6h)
  • 2 modes of the top two encoders, adjustable by switches on the back (push btn / shift)
  • push btn. = regular encoder incl. push button
  • shift = double encoder (normal turn / push and turn)
  • e.g. normal turning = encoder 1 = TC
  • e.g. push & turn = Encoder 2 = ABS
  • 2 modes of 12-position rotary switches, (12-pos. / shift)
  • 12-pos. = regular mode, each position gives a signal shift = shift function of the thumb encoder
  • e.g. 12-position rotary on position 1 = thumb encoder output 1 (e.g. TC)
  • e.g. 12-position rotary on position 2 = thumb encoder output 2 (e.g. ABS)
  • e.g. 12-position rotary on position 3 = thumb encoder output 3 (e.g. volume)
  • e.g. 12-position rotary on position 2 = thumb encoder output 2 (e.g. ABS)
  • e.g. 12-position rotary on position 3 = thumb encoder output 3 (e.g. volume)

64 Inputs

  • 14 x push buttons with positive tactile feeling
  • 2 x protective button guards
  • 2 x multifunctional 7-way joysticks (4 directions / rotate clock- anticlockwise/ push button)
  • 2 x encoders inc. push-button functionality, aluminium knob2 x thumb encoders
  • 2 x 12-position rotary switches, aluminium knob
  • 2 x paddle shifters
  • 2 x clutch paddles with electronic bite-point calibration

General information

  • 285 mm wheel diameter
  • 6 x 70 mm bolt pattern
  • robust, shielded coiled cable with industrial Binder M16 connector
  • coiled cable connector length approx. 64mm
  • spacer may be required to create sufficient clearance to the wheelbase
  • M5 x 12 mm stainless screws to mount QR included
  • Quick Release not included
  • to mount M5 threaded QRs, use captive screws
  • mass: 1140 g

High-quality finish

  • Maximum grip level from closed, ergonomic rubber grips
  • machined out of automotive aluminium
  • black anodized and laser-engraved
  • brushed front plate surface finish
  • glass bed blasted paddle surface finish

Contactless clutch paddles

  • CNC machined and anodized out of automotive aluminium
  • contactless hall sensor
  • smooth operation for maximum control

Magnetic paddle shifters

  • CNC machined and anodized out of automotive aluminium
  • strong snap-action force
  • alternative magnets to reduce force included
  • reliable automotive switches

Button labels

  • 50 pcs button labels each black and white
  • 72 pcs encoder labels (blue, green, red, black, yellow, white)
  • labels for various common steering wheel inputs

Electronic bite point calibration

  • precise adjustments in 1.0 % and 0.1 %
  • 1. push both joystick buttons for 1s to access bite-point mode
  • 2. LED lights up to indicate calibration mode
  • 3. rotate the left joystick for 1.0 % increments / right joystick for 0.1 % increments (LED flashes to indicate changes)
  • 4. exit calibration mode by pushing both joysticks again for 1s

Recommended procedure for finding the best setting:

  • 1. enter calibration mode and set bite-point to high value, e.g. 80 %
  • 2. pull the slave clutch only
  • 3. apply throttle
  • 4. reduce bite-point in 1.0 % increments (left joystick) until the vehicle starts moving
  • 5. make test starts to fine-tune the desired bite-point setting
  • 6. exit bite-point calibration mode

Recommended procedure for quick race starts

  • 1. pull both master and slave clutch
  • 2. apply throttle
  • 3. race start -> let master clutch snap
  • 4. it will take less than 20 ms to reach the desired bite point
  • 5. slowly release the slave clutch

Ascher Racing F64 SC V3 new features

  • Compared to its previous V1 model, the F64-USB V3 features new 12-position switches which provide improved feedback, a closed shape and motorsport rubber grips
  • Improved grip ergonomics including slightly larger diameter, thinner lower section, and different top shape to push the top button
  • Rubber grips: are not showing any tear
  • offers much more grip
  • perfect hardness (not too soft, not too hard) for much easier endurance racing without getting exhausted
  • can be used without using gloves (also with sweaty hands)
  • better hygienics
  • new 12-position rotary knob
  • better usability in “encoder mode” (rotational symmetry)
  • much better feedback

Our Payment Options

Payment logos from card companies Payment methods for Ascher Racing McLaren SIM wheels

Payment methods for Ascher Racing McLaren Artura Formula SIM wheels mobile view 

Free Shipping in Mainland UK

Shipping Service is via Parcelforce

Orders are usually dispatched same day if ordered before 2pm (UK Time)

All orders are sent on a 24hr service – please allow at least 48hrs in case of delays.

If you are ordering outside of UK shipping zones (Scottish Highlands, Channel Islands, Northern Ireland, Europe, USA etc) you will need to pay for extra shipping. We will contact you if necessary.

Please contact us if the website does not offer a shipping option to your location.

For returns, please get in touch and visit our returns page by CLICKING HERE.

Map of the our free shipping zone

Ascher Racing F64 V3 – your ticket to a new level of racing excitement! Packed with a dynamic 7-way joystick, 14 responsive push buttons & slick thumb encoders

Check out the latest enhancements in our F64 V3 we’ve fine-tuned the input options to perfection. Experience precision with two 7-way joysticks. What’s new? We’ve integrated radially mounted thumb encoders on the sides, delivering exceptional feedback with every motion. Get ready for a whole new level of control!

Close up shot of the black anodized Ascher Racing F64 V3 sim steering wheel, showing the coloured buttons and dials. Photo on a white background
The Ascher Racing F64 V3 Sim wheel diagram showing all the accessories it can be configured with. The wheel is black with brightly coloured switches, the other items are black boxes. There is a red circular arrow in the middle of the diagram to try and show the compatibility.

Revolutionize SIM setup with the Ascher Racing F64 V3 steering wheel! It’s not just any wheel – it’s a game-changer with its versatility in wheelbase compatibility.

Compatible with the following wheelbases – SC (WIRELESS) Simucube 2. USB VRS Direct Force, Fanatec Podium Hub, Simagic, Accuforce, Leo Bodnar, OSW (Argon), Simucube 2 and 1.

The heart of the Ascher Racing F64 V3 steering wheel beats with precision and strength. Crafted from a high-strength aircraft aluminium alloy.

Every inch of its clutch paddles and magnetic shifters is meticulously machined to deliver unrivalled performance. The resistance of the paddles can be adjusted using the supplied magnets. With the clutches, you can use the precise bite-point calibration to individually adjust the pressure point for perfect acceleration. Get ready to feel the Ascher Racing F64 wheels power in your hands!

Back of a sim racing steering wheel showing clutch paddles and magnetic shifters. The wheel is black with rubber handle, photographed on a white background
0
    0
    Your Cart
    Your cart is emptyReturn to Shop